, which are available on ftp://genie.ucd.ie/pub/alpha/milo/
Since major changes were necessary, I won't release a patchfile.
This version is working on a Ruffian. To compile it, you have to build a
platform specific kernel for the Ruffian hardware and then a specific Milo.
Please note: These sources are currently only working/tested on Ruffian.
I built milo successfully against Kernel 2.2.12.
I think you need binutils older than 2.9.1.0.23 (I used 2.9.1.0.19) to build
a working Milo. Something changed with the binary format since then and milo
still assumes the old format.
It worked for me using either egcs 1.1.2 or gcc 2.95.x.. other compilers were
untested.
As I didn't have the time to test how it behaves on a RedHat box, I only used a
SuSE box as build system, but I guess you won't need lots or even any changes.
I was not able to get Milo 2.2 up and running for an 164LX board,but fixing this
may be trivial.
The URL to get the Sources is:
http://www.stefan-reinauer.de/Milo/
Have fun and please send me thousands of comments....
Regards,
Stefan Reinauer, stepan@suse.de
