Subject: Re: [suse-axp] UP2000, 6.3 install
From: Ruediger Oertel (ro@suse.de)
Date: Tue Jan 18 2000 - 23:50:32 PST
On Wed, 19 Jan 2000, Iwao Makino wrote:
[...]
> > WHY?
> Here is last thing...
> Right after installation process, looking at /etc/aboot.conf
> 0:3/boot/vmlinuz ro root=/dev/sda2
> ....
> aboot look for the 3rd partition's etc/vmlinuz kernel to boot...
> however, using aboot, it should look for 2nd partitions etc/aboot.conf to
> boot, and install / in 2nd partition.... so isn't it supposed to be
> 0:2/ ...? instad of 3
aboot.conf is not automatically configured, this is just the default/example
configugration file.
>
> AND MagnetoOptical(MO) still don't work under SuSE....any fix?
> or should I tell customer who needs it to go back to RH5.2?
Do you know anything further on this ? I never tried to use a MO-drive.
>
> PS: This motherboard is UP2000 with dual 750/8 and 2GB RAM(too much system
> is no good for installation?)
> SROM versin is bit old, of G instead of current J, if it helps
--
with kind regards (mit freundlichem Grinsen),
Ruediger Oertel (ro@suse.de)
----------------------------------------------------------
does "DONT PANIC" give a hint ?
--
To unsubscribe, e-mail: suse-axp-unsubscribe@suse.com
For additional commands, e-mail: suse-axp-help@suse.com
This archive was generated by hypermail 2a22 : Tue Feb 01 2000 - 05:33:35 PST