On Tue, 15 May 2001, Hans Johnson wrote:
> Hello,
>
> I have a DP264 system with 2 500MHz daughter cards. I am having a
> problem getting it to boot. When the system is turned on, the Video
> card (Elsa Gloria Synergy) initializes, but then I just get a single
> blinking cursor in the upper left of the screen.
>
> I had been using this machine for the past two years, and then I needed
> to do a reboot today. It was during this reboot that the problem
> started.
>
> Has anybody had any experience with such things? Any help would be
> greatly appreciated.
Press enter several times...it sounds like the console is set to serial
instead of graphics.
P00>>set console graphics
P00>init
should fix that.
> Regards,
> Hans J. Johnson
> hans-johnson@uiowa.edu
>
> PS: Do I need to update the SRM with the fail safe boot option? If so,
> any hints about doing this?
I would upgrade SRM w/o the fail safe boot....there's no reason to use FSB
unless the SRM installed is corrupted.
--rdp
>
>
>
>
> _______________________________________________
> Axp-list mailing list
> Axp-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/axp-list
>
-- Rich Payne rpayne@alphalinux.org www.alphalinux.org_______________________________________________ Axp-list mailing list Axp-list@redhat.com https://listman.redhat.com/mailman/listinfo/axp-list
This archive was generated by hypermail version 2a22 on Fri Jun 1 04:36:14 2001 PDT
Send any problems or questions about this archive to webmaster@alphalinux.org.