Hi Alexey
Great!
Check disk size by typing "df" command and report it, please.
I will receive a new disk this week and after re-installing
RH6.2/Debain I will double check HD size and inform you guys
as soon as possible.
Luiz
>From: "Alexey Chupakhin" <achupahi@uic.rsu.ru>
>Reply-To: axp-list@redhat.com
>To: <axp-list@redhat.com>
>Subject: Re: Hard Drive size on Jensen
>Date: Mon, 7 May 2001 21:09:13 +0400
>
>Hi Luiz and Graeme!
>I just successfully connect IBM uwscsi HD 9.1 GB !!!!
>Only interface 50->68 is required.
>It seems, we do not use any Seagate 4xxxx series or may be 3xxxx.
>They are stupid and cannot work with Jensen (it seems). Great are Quantum
>and IBM.
>
>Thanks, Luiz!
>
>----- Original Message -----
>From: Graeme Hogg <graeme.hogg@ntlworld.com>
>To: <axp-list@redhat.com>
>Sent: Monday, May 07, 2001 7:01 AM
>Subject: RE: Hard Drive size on Jensen
>
>
> > Hi again, forget that, disk formats etc, can make the file system, but
>it
> > thinks its 17 gig, any ideas? i get fsck errors about certain blocks,
>and
> > the block
> > numbers are above how many are on the disk.
> >
> > Graeme Hogg
> >
> > -----Original Message-----
> > From: axp-list-admin@redhat.com [mailto:axp-list-admin@redhat.com]On
> > Behalf Of Graeme Hogg
> > Sent: 05 May 2001 16:14
> > To: axp-list@redhat.com
> > Subject: RE: Hard Drive size on Jensen
> >
> >
> > Hi Luiz,
> >
> > Thanks I did see it, my email client is playing up :-). It helped, I got
>the
> > disk working, and
> > formatted, I haven't tested the capacity yet, gonna try and put 3 gig of
> > stuff on it, and see what
> > happens. When I do a df it shows 17gig which is a bit strange, but its
> > probably not detecting the
> > size correctly.
> >
> > Thanks again for the help
> >
> > Graeme Hogg
> >
> > -----Original Message-----
> > From: axp-list-admin@redhat.com [mailto:axp-list-admin@redhat.com]On
> > Behalf Of Luiz Emediato
> > Sent: 05 May 2001 00:56
> > To: axp-list@redhat.com
> > Cc: graeme.hogg@ntlworld.com
> > Subject: RE: Hard Drive size on Jensen
> >
> >
> > Hi Graeme,
> >
> > it seems that you did not see the reply I sent to you
> > yesterday for your message below.
> > I will re-post it here:
> >
> > "Hi Graeme,
> >
> > As far as I know *minlabel* does not evaluate correctly the size of the
>big
> > disks. Forget the column displaying the disk/partition sizes in
>Megabytes.
> > You can calculate the real sizes multiplying the number
> > of sectors of each partition by 512 bytes/sector. So you can have
> > the exact size partitions. Use sectors instead of MB or GB for the
> > disk partitions.
> > Anyway, minlabel is just a help to start Linux install. During the
> > Linux installation you will be prompted to repartition your disk
> > using RedHat Druid or fdisk-BSD.
> > For instance, in my case, from SRM console I see 1.18GB for my
> > Quantum 18GB disk. From my VAXstation, using SRM console, I see
> > only 500MB for my Seagate 9.2GB ST410800N. SRM firmware does not
> > interpret big disk sizes correctly as well. But it doesn't mean that the
> > disk will not work. Everything is fine in my VAX, and with the
> > Alpha Jensen I could mount the 18GB Quantum as a Debian partition.
> >
> > Luiz"
> >
> >
> > >From: "Graeme Hogg" <graeme.hogg@ntlworld.com>
> > >Reply-To: axp-list@redhat.com
> > >To: <axp-list@redhat.com>
> > >Subject: RE: Hard Drive size on Jensen
> > >Date: Fri, 4 May 2001 02:56:04 +0100
> > >
> > >Hi Luiz,
> > >
> > >That info helps, made sure everything is correct now, the drive does
>come
> > >up
> > >as before
> > >but, in minlabel, it shows the correct sectors/unit, etc, but when you
>set
> > >a
> > >partition to
> > >use this, it only allocates 244 meg, instead of 4 gig. Playing about
>with
> > >the different
> > >partition sizes doesn't help, it only shows 244 or less. If I just
>write
> > >this to the disk
> > >when i try and format i get scsi timeout errors, etc, and the machine
> > >basically hangs.
> > >I low-level formatted the disk in a PC, with an adaptec 2940, worked
>fine,
> > >the disk works
> > >fine in a PC, 4 gig, i've used it plenty before.
> > >
> > >Any ideas?
> > >
> > >Graeme Hogg
> > >
> > >-----Original Message-----
> > >From: axp-list-admin@redhat.com [mailto:axp-list-admin@redhat.com]On
> > >Behalf Of Luiz Emediato
> > >Sent: 02 May 2001 21:19
> > >To: axp-list@redhat.com
> > >Subject: RE: Hard Drive size on Jensen
> > >
> > >
> > >Hi Graeme:
> > >
> > > >what settings you have on the scsi card, and the drive itself? I mean
>in
> > > >id, termination etc.
> > > >Mine has scsi timeout errors when trying to partition it. Comes up
>fine
> > >in
> > > >minlabel as a 4gig drive, but can't get any sort of
> > > >partitions onto it, and i'm stuck with just a 1 gig drive for my os >
>at
> > > >the minute.
> > >
> > >I have the following disk/system configuration on my Jensen:
> > >
> > >Seagate Barracuda ST15150N --> scsi id 2 --> Windows NT 4.0
> > >4.3 GB
> > >
> > >Seagate Barracuda ST15150N --> scsi id 0 --> Debian 2.2r2
> > >4.3 GB
> > >
> > >Quantum Atlas V QM318300XC --> scsi id 1 --> Debian disk partition
> > >LWR 18.3 GB LVD/SE Ultra-W (it will become RedHat)
> > >(HDD jumper is set up to Single-Ended mode)
> > >
> > >Adaptec AHA-1742A 32-bit SCSI Host Adapter for Alpha XP (slot 6)
> > > Host Adpter Interface: Enhanced Mode Only
> > > Host Adpter BIOS: BIOS Base Address CC000H
> > > Host Adpter SCSI ID: Device Id 7
> > > SCSI Bus Reset at Power on: Enable SCSI bus reset
> > > Interrupt (IRQ) 14 Trigger level
> > >
> > >Be sure to remove the SCSI terminators (R-packs) from the AHA-1742A
>board
> > >if
> > >you intend to have external scsi hard drives or devices.
> > >
> > >On my SCSI BUS I have:
> > >
> > >Internal devices:
> > >DEC CD-ROM id=4 (terminated <--- one bus end)
> > >ZIP drive id=5
> > >Quantum HD id=1
> > >Seagate HD id=2
> > >AHA-1742A host id=7
> > >
> > >External devices:
> > >Exabyte 8200 id=6 (desconnected, for now)
> > >Seagate HD id=0 (disk died)
> > >Seagate DAT tape id=3 (terminated <--- the other bus end)
> > >
> > >ECU config: "Enhanced Mode Only"
> > >
> > > (o) Enhanced Mode Only
> > >
> > >You might want to low-level reformat your disk to overcome your problem
> > >with
> > >Seagate Medalist 4 GB. I used a AHA-29160N PCI board from my PC in this
> > >case, and ran the Adaptec SCSI BIOS (ctrl-A) probram right before
>booting.
> > >Others use "scu" linux program but I never tried it so far.
> > >
> > >I hope this can help you. If you need more details let me know.
> > >
> > >Good luck,
> > >Luiz
> > >
> > > >From: "Graeme Hogg" <graeme.hogg@ntlworld.com>
> > > >Reply-To: axp-list@redhat.com
> > > >To: <axp-list@redhat.com>
> > > >Subject: RE: Hard Drive size on Jensen
> > > >Date: Mon, 30 Apr 2001 21:16:00 +0100
> > > >
> > > >Hi Luiz,
> > > >
> > > >I'm glad to hear you got that 18gig drive working. I'm having
>problems
> > >with
> > > >a
> > > >4 gig Seagate Medalist in a Jensen. Posted on here before, but still
> > > >couldn't get it to
> > > >work after the advise i got. I was wondering what settings you have
>on
> > >the
> > > >scsi card, and the
> > > >drive itself? I mean in id, termination etc. Mine has scsi timeout
>errors
> > > >when trying to partition
> > > >it. Comes up fine in minlabel as a 4gig drive, but can't get any sort
>of
> > > >partitions onto it,
> > > >and i'm stuck with just a 1 gig drive for my os at the minute.
> > > >
> > > >Thanks in advance,
> > > >
> > > >Graeme Hogg
> > > >
> > > >-----Original Message-----
> > > >From: axp-list-admin@redhat.com [mailto:axp-list-admin@redhat.com]On
> > > >Behalf Of Luiz Emediato
> > > >Sent: 30 April 2001 16:20
> > > >To: axp-list@redhat.com
> > > >Subject: Re: Hard Drive size on Jensen
> > > >
> > > >
> > > >Hi Sebastian, Jakub, Alexey, Will, Rene,
> > > >Hi everyone,
> > > >
> > > >The RH6.2 CD is bootable but aboot version there is 0.5, that is,
>there
> > >is
> > > >no menu of commands. Anyway, I tried the following:
> > > >I used a Seagate Barracuda 4.3 GB disk to install Debian Linux
> > > >(sorry gentlemen for citing Debian here but I want RedHat in one disk
>and
> > > >Debian in another one, that is, they are my Linux favorites)) and,
>*GOOD
> > > >NEWS* !, after finishing Debian install I could *SUCCESSFULLY*
> > > >mount my Quantum Atlas V 18GB as a disk partition, that is, there is
> > > >no problem at all with 18GB disks on the Alpha-Jensen AHA-1742A scsi
> > > >controller. Notice that the 18GB Quantum Atlas V has 512
>bytes/sector.
> > > >I previously low-level reformatted the 18GB Quantum disk and copied
> > > >aboot0.7
> > > >in to it using minlabel and copyboot to prepare the disk for the
> > >RedHat6.2
> > > >install and, again, aboot reports dummy_bread()!
> > > >I would like to try now *SWRITEBOOT* to see if I can overcome this
>aboot
> > > >problem, but I need some help. I downloaded the aboot0.7 package from
> > > >AlphaLinux to my *RedHatPC*, which has several programs including
> > > >swriteboot
> > > >to be compile, but I am not sure about the procedure to be used.
> > > >Unfortunatelly, my Seagate (Debian) disk just died yesterday,
>probably
> > >due
> > > >to the high temperature cause by a malfunctioning fan, and in the
> > >meantime
> > > >to get a new 4 GB disk I am wondering if I can
> > > >compile the package on my RH6.2PC and use swriteboot there to copy
> > > >bootlx to the 18GB Quantum for the RedHat 6.2 install (I have an
>Adaptec
> > > >ASC-29160N PCI board in the PC). What is the procedure to use
>swriteboot
> > >?
> > > >I
> > > >am looking for a good document. Any suggestions ?
> > > >By the way, I would like to try also *Jumpstart* , as mentioned by
>Will
> > > >Woods, but I have no clue about it. Where do I get Jumpstart
> > > >from ? Is it a Compaq/Digital product available somewhere ?
> > > >
> > > >Many thanks,
> > > >Luiz
> > > >
> > > >PS: I will prepare in the near future a document to report all the
> > > >procedures and problems I have been experiencing in both RedHat and
> > >Debian
> > > >Alpha-Jensen install.
> > > >
> > > >
> > > > >From: Sebastian Moeller <sebastian.moeller@lur.rwth-aachen.de>
> > > > >Reply-To: axp-list@redhat.com
> > > > >To: axp-list@redhat.com
> > > > >Subject: Re: Hard Drive size on Jensen
> > > > >Date: Tue, 3 Apr 2001 22:51:26 +0200 (CEST)
> > > > >
> > > > >Hello Luiz!
> > > > >
> > > > >I got a little further. This is really something strange ion
> > > > >aboot. dummy_bread() is the function which tries to access the
> > > > >"initial-kernel". And it fails...
> > > > > This problem is way out of my league, so it is probably the best
> > > > >way to get the new aboot maintainer involved in this, alas he is
>going
> > >on
> > > > >vacation (have a nice time...).
> > > > > But I seem to remember, that back in aboot 0.5 days I had similar
> > > > >error messages with my 9GB drive. I did not really hunt that one,
>as
>I
> > >by
> > > > >chance found a working aboot for my drive. Close thereafter aboot
>0.7
> > > > >apppaered which works just dandy on my drive. In fact the
>jensen17.img
> > > > >contains just the first 2880 blocks of this very disk. It is very
> > >likely
> > > > >that sectorsizes and cylinder sizes are different on your new
>drive.
> > > > > Is it possible for you to boot from cd-rom? If so it would be
> > > > >really interesting to see whether it helps to use fdisk to
>partition
> > >the
> > > > >disk and swriteboot to add an initial kernel (or a normal kernel
> > > > >somewhere reachable in the filesystem). (If this boots your kernel,
> > > > >then it is no real aboot issue but more a
> > > >
> >oops_we_(I?)_have_to_adjust_the_installation_instructions_one_more_time
> > > > >issue)
> > > > > Sorry that I can't be of any real help
> > > > >
> > > > >Ahoi & good luck...
> > > > >
> > > > > Sebastian Moeller
> > > > >
> > > > >
> > > > >On Tue, 3 Apr 2001, Luiz Emediato wrote:
> > > > >
> > > > > > Hi Sebastian,
> > > > > >
> > > > > > The error messages from aboot 0.7 are the following:
> > > > > >
> > > > > > aboot: loading uncompressed a...
> > > > > > aboot: loading compressed a...
> > > > > > dummy_bread: read error
> > > > >
> > > > > This is from dummy.c, part of the fs-stuff in aboot.
> > > > >
> > > > > > aboot: segment 0, 2663848 bytes at 0xfffffc0000310000
> > > > > >
> > > > > > unzip: attempted to read past eof
> > > > > >
> > > > > > Image floppy with jensen17.img was created using the following
> > > > > > command:
> > > > > > dd if=jensen17.img of=/dev/fd0 bs=512 count=2880
> > > > > > whose file worked fine on the 4GB hard drive.
> > > > > >
> > > > > > Concerning to the 18GB HD aboot problem, I notice that
> > > > > > after the above error messages are displayed, the hard drive
> > > > > > LED is ON ad nauseum, that is, it seems that the aboot is
>seeking
> > >for
> > > > > > something indefinitely.
> > > > > > When I use "q" to quit and try to return to aboot, SRM hangs
> > >probably
> > > > > > waiting for the hard drive to be available (HD LED is still ON).
> > > > > > Then I have to power-cycle the machine.
> > > > >
> > > > > Does the "halt-switch" on the case work in this situation?
> > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >_______________________________________________
> > > > >Axp-list mailing list
> > > > >Axp-list@redhat.com
> > > > >https://listman.redhat.com/mailman/listinfo/axp-list
> > > >
> > > >_________________________________________________________________
> > > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > > >
> > > >
> > > >
> > > >_______________________________________________
> > > >Axp-list mailing list
> > > >Axp-list@redhat.com
> > > >https://listman.redhat.com/mailman/listinfo/axp-list
> > > >
> > > >
> > > >
> > > >_______________________________________________
> > > >Axp-list mailing list
> > > >Axp-list@redhat.com
> > > >https://listman.redhat.com/mailman/listinfo/axp-list
> > >
> > >_________________________________________________________________
> > >Get your FREE download of MSN Explorer at http://explorer.msn.com
> > >
> > >
> > >
> > >_______________________________________________
> > >Axp-list mailing list
> > >Axp-list@redhat.com
> > >https://listman.redhat.com/mailman/listinfo/axp-list
> > >
> > >
> > >
> > >_______________________________________________
> > >Axp-list mailing list
> > >Axp-list@redhat.com
> > >https://listman.redhat.com/mailman/listinfo/axp-list
> >
> > _________________________________________________________________
> > Get your FREE download of MSN Explorer at http://explorer.msn.com
> >
> >
> >
> > _______________________________________________
> > Axp-list mailing list
> > Axp-list@redhat.com
> > https://listman.redhat.com/mailman/listinfo/axp-list
> >
> >
> >
> > _______________________________________________
> > Axp-list mailing list
> > Axp-list@redhat.com
> > https://listman.redhat.com/mailman/listinfo/axp-list
> >
> >
> >
> > _______________________________________________
> > Axp-list mailing list
> > Axp-list@redhat.com
> > https://listman.redhat.com/mailman/listinfo/axp-list
>
>
>
>_______________________________________________
>Axp-list mailing list
>Axp-list@redhat.com
>https://listman.redhat.com/mailman/listinfo/axp-list
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_______________________________________________
Axp-list mailing list
Axp-list@redhat.com
https://listman.redhat.com/mailman/listinfo/axp-list
This archive was generated by hypermail version 2a22 on Fri Jun 1 04:36:13 2001 PDT
Send any problems or questions about this archive to webmaster@alphalinux.org.