I am successfully using a Mylex DAC960PDU in my Digital Alphaserver 3300
running Redhat 7.0. The controller has PC firmware Rev 3.51. SRM doesnt
recognize the controller, so I can't boot to it. I can however boot to a
SCSI device on the onboard Qlogic controller and once linux is up it detects
the Mylex RAID controller just fine. Also, I had to create the RAID set
with a x86 machine and the Mylex DOS tools. Hope this helps.
Aaron Brueck
A+ Computer Specialists, Inc.
----- Original Message -----
From: "Island Computers US Corp" <dbturner@islandco.com>
To: <axp-list@redhat.com>
Sent: Sunday, May 06, 2001 5:18 PM
Subject: Mylex DAC960PDU w/ Red Hat 7.0 Alpha
>
> Subject: Mylex DAC960PDU w/ Red Hat 7.0 Alpha
>
>
> I was trying to install a DAC960PDU (aka KZPAC with firmware 2.49 for
Alpha)
> and Linux could not detect it
> (I had already initialised a RAID5 set with 4 x 4GB disks)
> Anyone know if maybe I should use the 3.51 PC firmware for this for any
> reason, or any other help would be greatly appreciated
> David
> > http://www.islandco.com
> > sales@islandco.com
> >
> > Island Computers US Corporation
> > 2700 Gregory Street,
> > Savannah, GA 31404
> > Tel: 912 447 6622
> > Fax: 912 201 0096
>
>
>
>
> _______________________________________________
> Axp-list mailing list
> Axp-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/axp-list
>
_______________________________________________
Axp-list mailing list
Axp-list@redhat.com
https://listman.redhat.com/mailman/listinfo/axp-list
This archive was generated by hypermail version 2a22 on Fri Jun 1 04:36:13 2001 PDT
Send any problems or questions about this archive to webmaster@alphalinux.org.