Wes Bauske (wsb@paralleldata.com)
Wed, 03 Mar 1999 00:52:31 -0600
Richard Heycock wrote:
>
> tulip-diag (on the XL300 reports);
>
> tulip-diag.c:v1.08 2/28/99 Donald Becker (becker@cesdis.gsfc.nasa.gov)
> Index #1: Found a Digital DC21040 Tulip adapter at 0x9000.
> Port selection is 100mbps-SYM/PCS 100baseTx scrambler, half-duplex.
> Transmit started, Receive started, half-duplex.
> The Rx process state is 'Waiting for packets'.
> The Tx process state is 'Idle'.
> The transmit unit is set to store-and-forward.
> Use '-a' to show device registers,
> '-e' to show EEPROM contents,
> or '-m' to show MII management registers.
>
This looks odd. I thought 21040 based cards are only 10Mb,
not 100Mb. The 2114x line is 10/100Mb. The 21040 card sitting
in my drawer is definitely 10Mb.
Wes
-- To unsubscribe: send e-mail to axp-list-request@redhat.com with 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
This archive was generated by hypermail 2.0b3 on Tue Mar 02 1999 - 23:00:11 PST