norvierk@muohio.edu
Tue, 2 Mar 1999 15:28:06 -0500 (EST)
On Tue, 2 Mar 1999, Chris Albertson wrote:
> Francois LAPERRUQUE wrote:
> >
> > >~1.5MB/s (hdparm -t) on my 164sx. Integer performance on a pc164sx/533
> > >should be about the same as a pII/350 (floating point much higher on
> > >anything but linux).
>
> 1.5MB/s wow! I get about 2.0MB/sec on my lowly 166Mhz Multia.
> That is with the builtin SCSI controller and an internal DEC
> RZ27 (or whatever) 1GB disk. I also see about 2.0MB/s on my P200
> (non-mmx) system's IDE disks. That pc164sx/533 needs help.
> I see 5.0MB/s on my PII 350 UWSCSI with NCR controller.
>
> It sounds like you need to go SCSI or get the IDE support in
> the kernel fixed.
If you reread my message, you'll note that the ide-udma patch increases the
ide performance on my 164sx (to 6MB/sec). :)
Randall
-- To unsubscribe: send e-mail to axp-list-request@redhat.com with 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
This archive was generated by hypermail 2.0b3 on Tue Mar 02 1999 - 14:00:10 PST