i have another redhat box, whether im actually capable of setting up an nfs server
is another story. im still on the newish side to linux, if needed i could setup
an nfs server (i got samba working well in a night), but i was hoping for a fast
solution. maybe i should go ahead and get the nfs server up. ill give it a few
days and see if anyone (including myself) can come up with a work-a-round.
thanks,
brad
Larry Snyder wrote:
> Hi Peter --
> More or less what I was thinking. I just looked at my one and only
> spare firewall box (multia) and it looks like I built all three of
> them over the local net. It's just been so long ago.....
> OTOH, I can try doing a 6.2 load and see what happens. IIRC, I had to do
> two floppies and have a net image ready on another box. Don't think it
> was BOOTP per se, but it was a net load (prolly nfs). Brad, have you
> another box you could nfs export the contents of the cd from?
> Just a couple thoughts...
> -ls-
>
> Peter Petrakis <ppetrakis@alphalinux.org> wrote:
> > You wouldnt happen to have another machine on the network that could act
> > as a BOOTP server? Reason being I could make you a BOOTP kernel that has
> > the RAMDISK attached so it loads the ramdisk immediatly after the kernel
> > finishes loading. What version of RH are you trying to install?
> >
> > Peter
> >
> > brad lynham wrote:
> > >
> > > i should have mentioned that, i initially was trying to boot from the cd
> > > with the good old srm console, and i was running into the same problem (as
> > > well as others). i then found a guide that told me about the milo floppy
> > > from the arc console, boot disk, ram disk, blah blah blah. still the same
> > > problem. this machine is running the last firmware released, and it has
> > > both srm and arc consoles.
> > >
> > > ive basically tried everything from head first plunging into the install
> > > to following the official installation guide. im definately not getting
> > > something.
> > >
> > > .brad
> > >
> > > Michal Jaegermann wrote:
> > >
> > > > > everything boots fine, but the install program dies with the error
> > > > > "unable to load second stage ramdisk". ive tried the install via
> > > > > cdrom (many many times), local image, http, and ftp from 4 different
> > > > > sources.
> > > >
> > > > Try rather booting from a floppy with a ramdisk on the second floppy.
> > > > Images are on a distribution CD. Quite possible that your loader
> > > > together with firmware fails flat on a loading ramdisk image.
> > > > You have an SRM console or ARC?
> > > >
> > > > Michal
> > >
> > > _______________________________________________
> > > Axp-list mailing list
> > > Axp-list@redhat.com
> > > https://listman.redhat.com/mailman/listinfo/axp-list
> >
> > --
> > www.alphalinux.org
> > Peter Petrakis Warrior/Engineer ppetrakis@alphalinux.org
> > "Oh my God! They killed Xena! You bastards!!"
> > "<BLAM!!> Who the hell are you!? Name's Ash <click clock> Housewares..."
> >
> >
> >
> > _______________________________________________
> > Axp-list mailing list
> > Axp-list@redhat.com
> > https://listman.redhat.com/mailman/listinfo/axp-list
>
> _______________________________________________
> Axp-list mailing list
> Axp-list@redhat.com
> https://listman.redhat.com/mailman/listinfo/axp-list
_______________________________________________
Axp-list mailing list
Axp-list@redhat.com
https://listman.redhat.com/mailman/listinfo/axp-list
This archive was generated by hypermail version 2a22 on Sat Mar 3 12:54:53 2001 PST
Send any problems or questions about this archive to webmaster@alphalinux.org.