Bruce Newland wrote:
>
> I am trying to put a 3.5" ide drive into my multia. Where can I get a
> ribbon for the data connection to the on board controller? I found the
> power connector at starship, but have yet to find the ide ribbon....
>
> Bruce Newland
> bnewland@tech.jps.net
I hacked my own adapter for the multia ide connection. I used an
adapeter designed to install a laptop harddrive in a desktop machine. I
found it at the local hamfest, so I can't tell you who makes it or where
to get one. I then forcibly (hacksawed) the rear end off the floppy cage
to get the necessary clearance and installed the adapter. Then I ran a
really long standard IDE cable out the back of the box through the pci
cardslot (along with my scsi cable, as neither drive can fit inside) It
works as well as expected with ide drives and cdroms, although it's
slower than molassas in January.
Chris Kloiber
-- To unsubscribe: send e-mail to axp-list-request@redhat.com with 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
This archive was generated by hypermail version 2a22 on Tue Feb 1 05:33:32 2000 PST
Send any problems or questions about this archive to webmaster@alphalinux.org.