Wes Bauske (firstname.lastname@example.org)
Fri, 15 Jan 1999 13:10:10 -0600
Tom Browder wrote:
> Sorry, system is a PC164 (Microway 500MHz Screamer) with 128 Mb RAM.
> As far as I know, X was not running at the time (it's a networked multi-user host).
> The video card is a Diamond Stealth 64 Video 3200 (S3 964).
> Booting from ARC.
I have almost that config and I had problems with
X messing up my tulip network card. I ended up
replacing the S3 with a ATI Rage Pro card.
I think there was an option something like
"no_pci_disconnect" that was supposed to help
but I had already replaced the S3 so it didn't
Also, what sort of SCSI hardware are you using?
I have a 2940UW and it is sensitive to what level
aic7xxxx is used. Some work, others don't. The
symptom of an incompatible aic7xxxx driver is a
lockup with no error messages, usually. Sometimes
it complains about trying to reset the channel too.
Wes-- To unsubscribe: send e-mail to email@example.com with 'unsubscribe' as the subject. Do not send it to firstname.lastname@example.org
This archive was generated by hypermail 2.0b3 on Sun Jan 24 1999 - 14:47:50 PST