Subject: 2.2.11 can't reset SCSI on PC164
From: Stephen Williams (steve@icarus.com)
Date: Mon Aug 16 1999 - 09:24:30 PDT
I have a PC164 with an Adaptec SCSI, and a few SCSI drives. It is
working find under 2.2.9, but 2.2.11 failed to boot. It loads fine,
but I get timeout messages when trying to reset the SCSI bus. I
can set my .config if desired.
I configured for PC164 (not generic) and the compiler is:
gcc version egcs-2.91.66 19990314 (egcs-1.1.2 release)
Here is the information from /proc/scsi/aix7xxx/0 (2.2.9 kernel):
Adaptec AIC7xxx driver version: 5.1.10/3.2.4
Compile Options:
AIC7XXX_RESET_DELAY : 5
AIC7XXX_TAGGED_QUEUEING: Adapter Support Enabled
Check below to see which
devices use tagged queueing
AIC7XXX_PAGE_ENABLE : Enabled (This is no longer an option)
AIC7XXX_PROC_STATS : Disabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X Ultra SCSI host adapter
Ultra Wide Controller
And here are my SCSI devices:
icarus.com % cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: Quantum Model: XP32150W Rev: L912
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST15230N Rev: 0058
Type: Direct-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: MATSHITA Model: PD-1 LF-1001 Rev: A105
Type: Optical Device ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 01
Vendor: MATSHITA Model: PD-1 LF-1001 Rev: A105
Type: CD-ROM ANSI SCSI revision: 02
-- Steve Williams "The woods are lovely, dark and deep. steve@icarus.com But I have promises to keep, steve@picturel.com and lines to code before I sleep, http://www.picturel.com And lines to code before I sleep."-- To unsubscribe: send e-mail to axp-list-request@redhat.com with 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
This archive was generated by hypermail 2a22 : Tue Sep 07 1999 - 16:15:02 PDT