Dear Will Woods,
I am experiencing problems with JumpStart.
I downloaded JumpStart! v1.4.1 ISO file from
http://www.support.compaq.com/alpha-tools/
I burned a CDR using the command:
cdrecord dev=6,0 speed=8 fs=3m ./jumpstart-1.4.1.iso
I turned the Alpha Jensen on and at the SRM prompt I
typed:
>>>sh dev
and cd-rom is DKA400
Notice that I am running Alpha System ROM 1.7 and SRM 32f.
Then I typed:
>>>boot -fl 3 dka400 (or boot dka400 -fl 3)
and I got:
INIT_S_CPU
AUDIT_BOOT_STARTS...
AUDIT_CHECKSUM_GOOD
AUDIT_LOCAL_BEGINS
84 FAIL
Then I set up boot definition:
>>>set bootdef_dev dka400
Power off/on
INIT_S_CPU
AUDIT_BOOT_STARTS...
?02 KSP INVAL
PC=00000000.000014845 PSL=00000000.00000007
>>>
>>>HALT
>>>HALT
>>>HALT
>>>boot -fl 3 dka400
aboot: Linux/Alpha SRM bootloader 0.7
aboot: Switching to OSF1 PALcode 1.35
aboot: booting from device 'SCSI 1 6 0 0 400 0 JENS-IO'
aboot: no disklabel found
iso: Max Size: 119155 Log Zone Size: 2048
iso: Fisrt datazone: 30 Root inode number: 61440
aboot: loading uncompressed boot/vmlinuz-j
aboot: loading compressed boot/vmlinuz-j
aboot: segment 0, 2059584 bytes at 0xfffffc0000310000
unzip: attempted to read past eof
Welcome to aboot 0.7
aboot> l
0
1
2
3 <--- vmlinuz-j (jensen)
aboot>
Then I typed:
aboot> 3
aboot: loading uncompressed boot/vmlinuz-j
aboot: loading compressed boot/vmlinuz-j
aboot: segment 0, 2059584 bytes at 0xfffffc0000310000
unzip: attempted to read past eof
It seems that JumpStart is not working on Jensen.
Would you please advise ?
Thanks,
Luiz
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
_______________________________________________
Axp-list mailing list
Axp-list@redhat.com
https://listman.redhat.com/mailman/listinfo/axp-list
This archive was generated by hypermail version 2a22 on Sat May 5 06:18:14 2001 PDT
Send any problems or questions about this archive to webmaster@alphalinux.org.