You MUST use either a Qlogic controller or a Symbios (52C895) on the SRM
The SRM does not yet work with Adaptec controllers (unless with a DS20e and
We sell the Qlogic's - An Ultra Wide (equivelent to Adaptec 2940UW) is
We also have some slower ones (equivelent to the Adaptec 2940W) for $129
We have the 53C895 (only certain firmwared brands work as boot device in
Part No. KZPCA-AA Ultra2 Wide $299
Island Computers US Corporation
2700 Gregory Street
Savannah GA 31404
Tel: 912 447 6622
Fax: 912 201 0096
This message and any files transmitted with it are confidential and
may be privileged and/or subject to the provisions of privacy legislation.
They are intended solely for the use of the individual or entity to whom
they are addressed. If the reader of this message is not the intended
please notify Island Computers US Corp immediately and then delete this
You are notified that reliance on, disclosure of, distribution or copying
of this message is prohibited.
----- Original Message -----
From: "Tom Browder" <firstname.lastname@example.org>
Sent: Wednesday, April 11, 2001 2:21 PM
Subject: Alpha PC164, SRM, and Adaptec 2940UW
> Can anyone give me hope?
> I want to upgrade to the Red Hat 7.0 Alpha distribution
> which requires the SRM console. But I can't get the
> SRS console to recognize my SCSI disks hanging off
> my Adaptec 29940UW. MILO still works but life would
> be easier if I could use SRM.
> Any hints?
> Tom Browder
> Axp-list mailing list
Axp-list mailing list
This archive was generated by hypermail version 2a22 on Sat May 5 06:18:12 2001 PDT
Send any problems or questions about this archive to email@example.com.