Axp-List Archive
Re: UP2K and 2.3.xx kernels

• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
• Next message: Toshinao Ishii: "tdfx"
• Previous message: Larry Snyder: "Re: Newbie question about booting."
• In reply to: W Bauske: "Re: UP2K and 2.3.xx kernels"
• Next in thread: Robert Williams: "Re: UP2K and 2.3.xx kernels"
• Reply: W Bauske: "Re: UP2K and 2.3.xx kernels"

W Bauske wrote:
>
>
> Copied 30GB onto a disk on the Promise card and it's
> stayed up. Currently reading the data back. It's actually
> running very well, around 24MB/sec initially. I see this
> drive taper off to around 13MB/sec at the end. We'll see
> how it goes.
>

An update on tests. I've moved a couple hundred GB of data
to/from the Promise attached drives without a problem. I
see 20+MB/sec using Maxtor 40GB 7200RPM drives. 
Copying from a drive on the primary to a drive on the
secondary channel shows an aggregate thruput above 35MB/sec.
This is using 2.2.15pre17. So, it looks like the Promise PCI
card is now functional and stable, at least on my UP2K running
SMP.

Wes

-- 
To unsubscribe: send e-mail to axp-list-request@redhat.com with
'unsubscribe' as the subject.  Do not send it to axp-list@redhat.com

• Next message: Toshinao Ishii: "tdfx"
• Previous message: Larry Snyder: "Re: Newbie question about booting."
• In reply to: W Bauske: "Re: UP2K and 2.3.xx kernels"
• Next in thread: Robert Williams: "Re: UP2K and 2.3.xx kernels"
• Reply: W Bauske: "Re: UP2K and 2.3.xx kernels"

This archive was generated by hypermail version 2a22 on Mon May 1 18:42:00 2000 PDT
Send any problems or questions about this archive to webmaster@alphalinux.org.