Ken Hansen (khansen@njcc.com)
Sat, 3 Apr 1999 08:23:14 -0500
24 Meg is not enough for the latest Red Hat images... 32 Meg should
be fine, if you can boost the memory up you should be fine...
If I can assume for a minute, your Multia/UDB probably has 2 12 Meg
"special" SIMMs, that means you can simply add 2 4 Meg SIMMs
and finish your install. I bet that if you post a request here you will
find someone that has a couple of 4 Meg SIMMs they'd sell cheap,
since most AS200s and other low-end Alphas came with these
"valuable" upgrades...
Good luck, HTH,
Ken
khansen@njcc.com
-----Original Message-----
From: Geoff Shukin <shukin@home.com>
To: axp-list@redhat.com <axp-list@redhat.com>
Date: Friday, April 02, 1999 9:32 PM
Subject: Re: Installing
>Paul B. Brown wrote:
>
>> To Install RedHat Linux 5.2 on a UDB
>>
>>
>> 69. At the MILO> prompt, type:
>>
>> boot fd0:vmlinux.gz root=/dev/fd0 load_ramdisk=1 prompt_ramdisk=1
>>
>> 70. Press RETURN and the system will begin the boot process.
>
>I get to this on a friend's UDB and get a : "fatal error: Not Enough
Memory to
>load kernel"
>
>Does anyone know how to get around this on a UDB?
>
>This is a 24 Meg box with a 340 Meg SCSI Internal drive (No External SCSI
Port). I
>was hoping to make this into a good firewall using the internal ethernet
interface
>and a PCMCIA Ethernet card.
>
>Thanks
>
>Geoff Shukin
>
>--
>To unsubscribe: send e-mail to axp-list-request@redhat.com with
>'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
>
>
-- To unsubscribe: send e-mail to axp-list-request@redhat.com with 'unsubscribe' as the subject. Do not send it to axp-list@redhat.com
This archive was generated by hypermail 2.0b3 on Sat Apr 03 1999 - 06:00:07 PST