RE: Replace internal 2.5" hard drive with a 3.5" one?

Alan Wood (alan@abfl.co.uk)
Wed, 2 Oct 1996 17:26:19 +0100

Messages sorted by: [ date ][ thread ][ subject ][ author ]
Next message: John Banghart: "Perl trouble"
Previous message: Brian E.W. Wood: "Re: Replace internal 2.5" hard drive with a 3.5" one?"

> There is one serial port which actually is two port. Please let me know
> where I can found a cheap Y cable for it. The vendor told me Dec sell it
> for $157 which make me hard to believe.
>
I seem to recall that DEC wanted $75 for this cable (still too high).
You can make one yourself if you are handy with a soldering iron -
the connector follows standard RS-232C which specifies both a primary
and a secondary port.

If you want the pin out, then http://www.annex.co.uk has them.
Can't remember the location though, sorry.

Alan

--
To unsubscribe: mail -s unsubscribe axp-list-request@redhat.com < /dev/null

Next message: John Banghart: "Perl trouble"
Previous message: Brian E.W. Wood: "Re: Replace internal 2.5" hard drive with a 3.5" one?"