SCSI booting problem ++

Frederic.Tschannen@unifr.ch
Fri, 29 Nov 1996 14:50:35 +0100 (MET)

Hi there,

I have a AS255 which worked correctly with Dec OSF.
Last week I decided to install the Linux redhat 4.0 CDROM distribution.

Booting the avanti kernel from the CDROM caused following problem
while SCSI initalisation. Since my system worked correctly with
OSF Ultrix, I think it's neither a termination, nor a SCSI cable problem.

----
boot procedure loops :
...
scsi: aborting command due timeout: pid 1,scsi 0,channel 0,id 0,
lun 0 Inquiry 00 00 00 ff 00
ncr53c8xx_abort : abort call
ncr53c810-0: abort ccb=fffffc0003f70f30 (skip)
SCSI host 0 abort (pid 1) timed out - resetting
SCSI bus is being reset for host 0 channel 0
ncr53c810-0: restart (scsi bus reset).
scsi: aborting command due timeout: pid 1,scsi 0,channel 0,id 0,
lun 0 Inquiry 00 00 00 ff 00
ncr53c8xx_abort : abort call
ncr53c810-0: abort ccb=fffffc0003f70f30 (skip)
SCSI host 0 abort (pid 1) timed out - resetting
SCSI bus is being reset for host 0 channel 0
ncr53c810-0: restart (scsi bus reset).
...
----

In case you have a solution for this problem, please contact me.

Thanx,
Frederic

-- The road to to success is always under construction. --
------------------------------------------------------------------------
Frederic Tschannen <Frederic.Tschannen@unifr.ch>
Computing Center - University of Fribourg, Switzerland
Misericorde, CH-1700 Fribourg, Tel. +41-26-3007207, FAX +41-26-3009704
------------------------------------------------------------------------

--
To unsubscribe: send e-mail to axp-list-request@redhat.com with
'unsubscribe' as the subject.  Do not send it to axp-list@redhat.com



Feedback | Store | News | Support | Product Errata | About Us | Linux Info | Search | JumpWords
No Frames | Show Frames

Copyright © 1995-1997 Red Hat Software. Legal notices