Hi,
Thanks for replying. The machine currently has 96MB of FPM 60ns SIMMS.
This is the same memory that was in the system when I got it and I have
since tested them to be fine. The system actually had 128MB but 32 of it was
70ns so I moved them out. I didn't state it before, but the leds that stay
lighted are D10,D12,D15,D16,D17. Also, since I am new at this, how would I
talk over a serial port?
-----Original Message-----
From: Rich Payne [mailto:rdp@talisman.alphalinux.org]
Sent: Wednesday, December 15, 1999 7:20 PM
To: Prophete J. Charles
Cc: axp-hardware@lists.alphalinux.org
Subject: Re: your mail
On Wed, 15 Dec 1999, Prophete J. Charles wrote:
> I just inherited an AlphaStation 400 4/233 but the
> machine was left bare except for the mainboard and cpu
> board. I eventually want to get RedHat up and running on
> the system but I would like to check if the machine
> works first. What is the core hardware required to
> fire the machine up? Do I need a special video card
> and/or fixed frequency monitor? So far, I have tried
> a #9 Imagine 128 card and a NEC Multisync XV17+, but
> when I start the machine, I get a green screen and
> several of the LEDs on the board light up. Does
> anyone know what they mean? Any and all help will be
> greatly appreciated.
Well, you didn't specifically state it, so is there memory in the machine?
and if so what type?
The minimun should be Motherboard, CPU, memory. You might not even need
video as SRM will talk over the serial port if no VGA/Keyboard is found.
I'm not sure which firmware as AS400 uses (SRM or ARC). Anybody?
Rich Payne
rpayne@alphalinux.org www.alphalinux.org
This archive was generated by hypermail version 2a22 on Mon Jan 3 11:15:07 2000 PST
Send any problems or questions about this archive to webmaster@alphalinux.org.