On Wed, Aug 02, 2000 at 12:45:41PM +0200, Frank Berger wrote:
>
> Hello,
>
> I'm not sure if this Question belongs to this list, neither do I know if
> this Question is answered in a FAQ.
>
> In either point, please point me to the right list or FAQ
>
> well, my question:
>
> I have a Multia (UDB) Noname 166, running Suse 6.1/Kernel 2.2.9
> and I'm trying to get a AVM Fritz PCI ISDN card running.
>
> Whem I'm tryiun to load hisax though
> (with 'modprobe hisax type=5 protocol=2 irq=15 io=[9000|64000]')
use modprobe hisax type=27
do _not_ specify irq or io-port for PCI cards.
type 5 is an ISA card
type 27 is the PNP and PCI variants
> the kernellog says that that at the given IO-port the HSCX-Version could
> not be found.
>
> here my questions:
>
> + does anybody have this working ?
yes, Fritz!PCI on a AXPpci33 'noname'
> + does anybody know about valid IO-Ports in this combination ?
don't specify any - the PCI subsystem will find out suitable values (actually,
it will decide on the address and _tell_ the card the address it has to use)
> + does anybody have a usefull hint?
Viel Erfolg!
Thorsten
-- | Thorsten Kranzkowski Internet: dl8bcu@gmx.net | | Mobile: ++49 170 1876134 Snail: Niemannsweg 30, 49201 Dissen, Germany | | Ampr: dl8bcu@db0lj.#rpl.deu.eu, dl8bcu@marvin.dl8bcu.ampr.org [44.130.8.19] | _______________________________________________ Axp-hardware mailing list Axp-hardware@lists.alphalinux.org http://lists.alphalinux.org/mailman/listinfo/axp-hardware
This archive was generated by hypermail version 2a22 on Fri Sep 1 05:03:56 2000 PDT
Send any problems or questions about this archive to webmaster@alphalinux.org.